
Ifenitshala yangaphandle yorhwebo materials decide how long a patio keeps earning. Indoor dining chairs can last years in a climate-controlled room. Move the same chair outside and it faces UV rays, afternoon storms, spilled cocktails, and in coastal cities, salt in the air every single day. A seat that looks fine in week one can fade, rust, or split before the end of its first season.
Most restaurant patios end up choosing between three materials for seating and tables: woven rattan (usually synthetic PE rattan over a metal frame), aluminum, and teak wood. Each behaves differently under sun, rain, and daily service. Here is how they actually compare, so the choice matches your climate, your service style, and your budget.
What a Patio Does That a Dining Room Never Will
Before comparing the three materials, it helps to be precise about what an outdoor dining environment actually puts furniture through:
- UV exposure fades fabric, dries out natural fibers, and chalks cheap plastics
- Rain and humidity swell wood, corrode bare steel, and trap moisture inside cushion cores
- Temperature swings expand and contract joints, loosening screws and glue lines season after season
- Salt air attacks unprotected metal fast, often eating the frame from the inside out
- Daily service adds its own wear: chairs dragged across concrete, trays set down hard, guests leaning back on two legs
Indoor-grade furniture fails outdoors not because it is badly made, but because none of these conditions were part of its design brief. Commercial outdoor furniture is specified differently from the frame outward.
PE Rattan: Ukungagqibeki ngesizathu

Walk past a busy outdoor dining strip and most of the chairs you see are woven rattan, or more precisely, PE rattan: a synthetic polyethylene weave wrapped around a metal frame. Natural rattan is a lovely indoor material, but it absorbs moisture and turns brittle outdoors, so serious outdoor restaurant furniture uses the synthetic version.
Apho Iphumelela khona
- Quality PE rattan handles rain and UV without cracking or fading for years, and shrugs off chlorine splashes near poolside dining
- The weave has a slight flex that feels more forgiving than a hard shell, and the texture reads warm and relaxed, which suits cafes, garden restaurants, and resort decks
- Weave density, color, and pattern are all adjustable, so the same material covers everything from a Scandinavian bistro to a tropical terrace
Apho abathengi batshiselwa khona
- The frame underneath matters more than the weave. Rattan wrapped over softwood or thin steel fails at the joints long before the weaving wears out. Insist on a powder-coated aluminum frame: light enough for staff to rearrange nightly, and it will not rust
- Weave quality varies widely. Cheap PVC weave turns chalky and brittle after one or two summers. Ask for UV-stabilized PE and get the expected outdoor lifespan in writing
- Woven seats cannot be re-upholstered the way fabric ones can, so plan cushion replacement as its own budget line
Oku kuthetha ukuthini xa uSebenza
For most patios, a PE rattan dining chair on an aluminum frame is the most balanced choice: comfortable, light, weatherproof, and priced well below teak. Our outdoor rattan chair with armrests and i-aluminiyam-isakhelo esenziwe ngesandla se-PE wicker isitulo zombini zakhiwe kolu nkcukacha.
IAluminiyam: Isakhelo esenza umsebenzi ofihlakeleyo

Aluminum is the most practical structural material for commercial outdoor use, and in many projects it carries the load even when the visible surface is rattan, WPC, or stone.
Kutheni iKhokela kwiiProjekthi zaseNxwemeni
Its biggest advantage is simple: aluminum does not rust. It forms its own protective oxide layer, which makes it the default for coastal restaurants where steel frames corrode within a season or two. It is also the lightest option here, so seating gets stacked, rearranged, and stored nightly without damage. For venues that clear the patio for events or cleaning, that alone settles the decision.
Iintengiso ezimbini
Bare aluminum transfers heat, so in full sun a metal seat becomes untouchable by midday; aluminum chairs therefore usually pair with a woven seat, textile sling, or cushion. And thin-wall extrusions wobble under heavy use. Wall thickness and joint construction are where manufacturers cut costs, and the difference shows within months.
Powder coating bonds well to aluminum in any RAL color, so frames can match a brand palette or disappear into the interior scheme, a flexibility neither wood nor rattan offers at the same cost.
Ipateni yoKwakha iHybrid
A configuration that works well in practice pairs aluminum structure with WPC or synthetic slats for seats and tops. Our WPC slatted outdoor table with aluminum X-base is a typical example, matching a rust-proof frame with a slat top that sheds rain and stays cooler than stone in direct sun.
I-Teak: Ukuhlawulela Iminyaka elishumi elinesihlanu elandelayo

Teak is the material guests notice. Golden tone, tight grain, real weight: the signals read as quality, which is why teak dominates high-end resort and fine-dining terraces.
Kutheni Ifumana Ixabiso
Teak contains natural oils and rubber that repel water and insects, so left untreated it weathers to a soft silver-grey without rotting, a patina many upscale venues prefer. Well-made teak is the only option in this comparison routinely expected to last 15 to 25 years in outdoor commercial service, and it repairs: scratches sand out, joints re-glue, a weathered set gets restored instead of replaced.
Iindleko zexabiso elingaphaya kwe-invoyisi
Genuine plantation teak runs several times the price of aluminum or rattan equivalents, and supply keeps tightening, so demand FSC or verified plantation certification rather than taking the word “teak” at face value. The chairs are heavy, which slows nightly resets and raises freight. And maintenance becomes a yearly decision: keep the honey-gold with oiling or sealing once or twice annually, or accept the silver-grey. Either is legitimate, but decide before the first season, not after.
Indlela yokutyela eqhele ukuyihambisa ngayo
A sensible pattern is to spend teak money on the signature pieces, the statement dining chairs and host tables, and use aluminum or rattan for high-turnover seating. Budget concentrates where guests actually look.
Icala ngecala
| Umba | I-PE Rattan (isakhelo sealuminiyam) | Aluminiyam | Iteki |
| Ukumelana nemozulu | Egqwesileyo | Egqwesileyo | Egqwesileyo |
| Unxweme / umoya wetyuwa | Kakuhle kakhulu | Eyona nto ingcono | Kakuhle kakhulu |
| Intuthuzelo | Iphezulu, i-flex yendalo | Ifuna isilingi okanye umqamelo | Iqinile, iklasikhi |
| Ubunzima | Ukukhanya | Ikhaphukhaphu | Inzima |
| Isondlo | Phantsi | Isezantsi kakhulu | Phakathi ukuya phezulu |
| Ubomi borhwebo | 5-8 iminyaka | 8-12 iminyaka | I-15-25 iminyaka |
| Iindleko zangaphambili | $$ | $$ | $$$$ |
| Okona kulungileyo | Iikhefi, indawo yokutyela egadini, iindawo ekuchithelwa kuzo iiholide | Iipatisi eziphezulu zenguqu, iindawo eziselunxwemeni | Indawo yokutyela entle, iiholide, iindawo zokutyikitya |
Vumela iMozulu yakho ukuba iVote yokuGqibela
The same chair performs differently in Dubai and in Vancouver, so local conditions should make the last call.
Izixeko ezingaseluNxwemeni
Aluminum frames first, PE rattan second, and no unprotected steel anywhere, fasteners included.
Imozulu eshushu, ePhezulu-UV
UV-stabilized PE rattan and light powder coats. Dark metal surfaces in direct sun are unusable at midday.
Imozulu efumileyo, enemvula
Quick-drying construction wins: open weaves, slat tops, cushions with drainable cores. Water trapped inside a frame does more damage than rain on the surface.
Izixeko ezinoBusika bokwenyani
Plan for storage. Stackable aluminum and rattan seating moved indoors each winter will outlast heavier furniture left out year-round.
Izahlulo ezisilelayo phambi kokuba izitulo zenze
Seating gets the attention, but tabletops and soft goods usually fail first in outdoor service.
Iitafile zetafile
Sintered stone resists scratches, heat, and UV with almost no upkeep, which makes it the strongest choice for unshaded patios. Our outdoor garden dining table with sintered stone top is specified for exactly that exposure. WPC and HPL cost less and suit covered terraces.
Imiqamelo
Specify outdoor-grade foam with drainable cores and solution-dyed acrylic or olefin covers. Interior-grade foam held moisture and grew mold within a single rainy season in more than one project we have been asked to fix.
Iinkcukacha zeFastener Akukho mntu ujongayo
Confirm the fasteners are stainless or coated. Connectors rust before frames do, and a wobbly chair on a brand-new table is an entirely avoidable sight.
Getting the material decision right up front costs less than rebuilding a patio every second summer. If you are planning an outdoor dining project and want the specification reviewed against your climate and service model, our team works on custom outdoor furniture for commercial use every day.












